Wondering how to set the Cuisinart coffee maker clock? Do you find it difficult to set your clock and timer as a self-timer too? You are in the right place.
Wake up to a freshly brewed cup of fragrant coffee every morning when you use the Cuisinart coffee maker.
This coffee maker features an alarm function so you don't have to spend a waking moment without caffeine.
Choose a regular or strong flavor profile and set the brew time up to 24 hours in advance so your next cup is ready when you are.
The backlit LCD display is easy to read, a ready tone can be turned on or off, and an indicator light shows when it's time to descale
How to set the clock on the cuisinart coffee machine on different models
In this article, we will show you how to set the clock on your Cuisinart coffee maker, such as the Cuisinart 12-Cup, Grind-and-Brew, Single-Serve, Perfectemp, so you can enjoy a fresh, flavorful cup of coffee in the morning.
So please follow the instructions and steps below.
How to set the clock on the cuisinart ss-15p1 coffee center 12 cup coffee maker?
START THE WATCH
When the coffee maker is plugged in and the power switch is on, 12:00 flashes
To set the Cuisinart coffee maker clock:
1. Rotate the function knob to clock.
2. Press the hour and minute buttons to select the desired hour.
3. Hold down the keys to scroll through the digits, or press and release to advance one digit at a time.
4. As you scroll, the numbers will scroll slowly and then faster.
5. When the displayed number approaches the desired time:
- press and release to advance one digit at a time.
- Make sure the PM indicator is on if you want a PM time.
6. To finish setting the clock:
- Turn the function knob to a different setting or just wait for the numbers to stop flashing.
SETTING THE AUTOMATIC ON TIME
Turning the function knob to PROG will flash the previously selected on time or the default time (12:00).
1. Turn the function knob to PROG.
- Use the hour and minute buttons as above to set the brew start time.
2. Turn the function knob to AUTO ON.
- Press the BREW/WARM button to activate the program.
When you press BREW/WARM, the blue AUTO ON light will illuminate, indicating that the AUTO ON function has been activated. The LCD screen shows the current time.
3. The AUTO-ON brewing cycle begins
The blue light around BREW will flash slowly when the brew cycle begins at the selected time.
When the brew cycle is complete, WARM will illuminate to indicate the keep warm cycle.
The lights will turn off when the hold cycle is complete and BREW will turn on again to indicate the brewer is ready for the next brew.
NOTE: To start the brew time at the same time the next day, simply make sure the function knob is set to AUTO ON and press and release the Brew/Warm button again. The blue auto power light will illuminate.
SETTING THE AUTOMATIC SHUT-OFF TIME
1. Turn the function knob to AUTO OFF.
Use the hour and minute buttons as above to program your coffee maker to turn off 0-4 hours after the end of the brew cycle.
How do I set the clock on the cuisinart DGB-650BC Grind-and-Brew 10-Cup Thermal Automatic Coffeemaker?
START THE WATCH
When the coffee maker is connected, 12:00 is displayed until you set the time.
Step 1. Enter time setting mode
1. Press and hold the hour or minute button until the clock starts flashing.
2. Press any button to select the desired time.
3. Hold down the keys to scroll through the digits, or press and release to advance one digit at a time.
As you scroll, the numbers slowly advance and then speed up.
As the displayed number approaches the desired hour, press and release to advance one digit at a time. Make sure the PM indicator is on if you want a PM time.
Step 2. Exit the time setting mode
1. Press any function button except Hour or Minute to exit the mode.
How to install the dishwasher and check ...
2. If you do nothing for five seconds, exit the mode.
SETTING THE PROGRAM TIME
When you press the Set Schedule button, a previously selected auto-on time or the default time (12:00 PM) is displayed.
Step 1. Enter the program time setting mode
1. Press and hold the program setting button until the green light and LCD start flashing.
You are now in program time setting mode. Set the time you want the coffee to start brewing by following the instructions under “Entering the Time Setting Mode”.
The coffee maker starts dispensing coffee at the programmed time. Program mode cannot be accessed when the coffee maker is in the brew cycle.
How do I set the clock on the cuisinart SS-10P1 Premium Single Serve coffee maker?
The clock setting is optional. When the clock is set, the time will be displayed on the control panel.
Use:You must set the clock if you want to use the SET ON/OFF TIME programming function.
1. Press the menu button. Programming options will appear on the control panel with the CLOCK flashing. The word OFF will appear at the top of the control panel to indicate that the clock is not set (see Figure 14).
2. Press or hold (D) to scroll through the hours until you reach the appropriate time. Make sure the PM indicator is on if you want a PM time.
3. Press or hold down (D) to scroll through the minutes until you reach the minutes you want.
4. If you arrived at the right time.
- Press the menu button to set the time.
- Continue to press Menu to scroll through the remaining programming features and exit programming mode.
5. The correct time should now be displayed at the top of the panel.
Use:
Depending on the current mode of the coffee maker, other symbols are also displayed.
If power to the brewer is lost, the clock will need to be reset.
How do I set the clock on the Cuisinart DCC-3200P1 Perfectemp coffee maker?
START THE WATCH
When the coffee maker is connected, 12:00 will flash on the display for 10 seconds, indicating the machine is in clock setting mode.
When 12:00 stops flashing, simply press and hold the hour or minute button to return to the flashing clock setting mode.
1. Set hours and minutes
- Press one of the buttons to select the desired time.
- Press and hold to scroll through digits quickly, or press and release to advance one digit at a time.
- Make sure the PM indicator is lit when setting a PM time.
SETTING THE AUTOMATIC ON TIME
1. Press and hold the Prog/Auto On button for 2 seconds.
The digital display shows the standard time (12:00) or the previously selected time.
Five seconds after completion, the device will automatically exit autostart setting mode and the indicator light will illuminate to let you know autostart is enabled.
USE:Alternatively, to exit Auto Power Setup mode, simply press the Auto Power button again.
2. To enable Auto On with the previously selected time:
- Press the Prog/Auto On button.
- The previously set time appears and the display lights up.
- The screen returns to the clock settings.
3. To disable auto power on:
- Press the illuminated auto-start button; The light will turn off, indicating the mode is off.
SETTING THE AUTOMATIC SHUT-OFF TIME
1. Press and hold the auto power off button for 2 seconds.
The preset timed Auto-Off value (2:00) or the previously selected time will flash on the digital display. Follow the instructions under SET THE CLOCK to program the brewer to turn off 0-4 hours after the end of the brew cycle.
2. To exit/confirm the auto power off time setting:
- Don't touch any keys.
- The setting mode for the automatic switch-off is automatically exited after 5 seconds.
TURN OFF THE READY TONE
Your coffee maker has a ready tone that will beep 5 times when the coffee is finished brewing.
To disable this warning:
- Press the Tone button, an icon will appear on the screen to indicate the tone is off.
To turn the sound back on:
- Press the Tone button again, the icon will disappear.
Also read:
- How to use the Mr Coffee Iced Coffee Maker?
- How do you clean a Braun coffee maker?
- How do I clean the Farberware coffee maker?
How do I reset the Cuisinart coffee maker?
1. Turn the Function knob to Auto Off
2. Press and hold the hour button until the clock digits flash.
3. You can then use the hour and minute buttons to set how long you wantcoffee machinestay inside
4. You can choose between 0 minutes (seems to be what you have set now) up to 4 hours.